DW312 TREND SETTER MINI 360
400 ML / 13.5 OZ STAINLESS STEEL TUMBLER
Product dimensions:
(2.125" x 7.250" x 3.000")
Product Description:
Mini but mighty, the Trend Setter Mini 360 covers all the angles. An excellent choice for the coffee connoisseur, the 400 ml/13.5 oz insulated stainle ...See More
Qty
25
50
100
250
500
Price
$26.00
$25.00
$23.75
$22.50
$21.50
All prices are in 
CAD
CAD
Default Branding : Silk Screened
Centered on Front(default location):
(3.000" x 2.000")
Centered on Back:
(3.000" x 2.000")
Maximum number of imprint colours: 2
Laser EngravedCentered on Front(default location):
(1.500" x 1.500")
Centered on Back:
(1.500" x 1.500")
Imprint appears low contrast when engraved on the Silver
Setup Charge:
$80.00
(G)
ALL MEDIA
VIEW IN YOUR ROOM
DESIGN A MOCKUP
See More
CARE INSTRUCTION
- DISHWASHER MAY AFFECT THE PAINT, PRINT AND/OR ENGRAVING. HANDWASH ONLY.
- WASH BEFORE USE. TO WASH: USE A MIXTURE OF WARM WATER AND MILD DETERGENT, NO HARSH CHEMICALS.
- DO NOT MICROWAVE, DO NOT FREEZE.
- NOT RECOMMENDED FOR CARBONATED DRINKS.
- ALWAYS MAKE SURE THE LID IS SECURED PROPERLY BEFORE DRINKING OR TRANSPORTING.
- TO PREVENT SPILLS WHEN FILLING, ALWAYS LEAVE SUFFICIENT SPACE FOR LID.
- PRE-HEAT OR PRE-COOL BOTTLE BY ADDING HOT OR COLD WATER BEFORE FILLING.
- MISUSE OF PRODUCT COULD RESULT IN PERFORMANCE FAILURE.
- NOTE: WHEN EXTREMELY HOT LIQUIDS ARE CONTAINED WITHIN A TIGHTLY SEALED SMALL SPACE, THE HEIGHTENED AIR PRESSURE CAN LEAD TO THE LID LIFTING. OPEN THE SLIDER FOR 2-3 MINUTES TO RELEASE THE STEAM AND DECREASE PRESSURE. THE DOUBLE-WALL CONSTRUCTION OF THE TUMBLER WILL ENSURE THAT THE LIQUID INSIDE STAYS HOT WHILE MAINTAINING AN OPTIMAL TEMPERATURE FOR DRINKING.
- TO CLEAN THE 360 SIP LID, FOLLOW DISASSEMBLY INSTRUCTIONS BELOW:
- 1) REMOVE LID FROM TUMBLER
- 2) UNSCREW THE PLUNGER (A) BY TURNING COUNTERCLOCKWISE
- 3) UNSCREW BOTTOM COMPONENT (B) BY TURNING CLOCKWISE
- LID IS NOW SEPARATED INTO 3 DIFFERENT COMPONENTS FOR THOROUGH SANITIZING. HAND WASH WITH WARM, SOAPY WATER & AIR-DRY. AVOID USING HARSH CLEANING AGENTS.
- TO RE-ASSEMBLE:
- 4) SCREW-ON COMPONENT B BY TURNING COUNTER-CLOCKWISE
- 5) SCREW-ON PLUNGER COMPONENT A BY TURNING CLOCKWISE
